Cylindrical Roller Bearings
Cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are in:the number of roller rows (one, two or four)
the type of cage (with, without or special designs).Bearings with a cage can accommodate heavy radial loads, rapid accelerations and high speeds.Full complement bearings (without a cage) incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads at moderate speeds.
High-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage.
the configuration of the inner and outer ring flanges (position and number of guide flanges)

- FAG NUP2213-E-M1-C3 Cylindrical Roller Bearings
- 1 000 min-1
- 160 mm

- FAG NUP2211-E-TVP2-C3 Cylindrical Roller Bearings
- 4550 kN
- 1176 mm

- FAG NUP2212-E-M1 Cylindrical Roller Bearings
- 2.3 mm
- 182 mm

- FAG NUP2210-E-TVP2-C3 Cylindrical Roller Bearings
- 9360 N
- 5850 N

- 50 mm x 90 mm x 23 mm FAG NUP2210-E-TVP2 Cylindrical Roller Bearings
- 28.0000 mm
- 26000 rpm

- FAG NUP2210-E-M1-C3 Cylindrical Roller Bearings
- 0.97 kg
- 151 mm

- FAG NUP220-E-TVP2-C3 Cylindrical Roller Bearings
- 155-67
- 5000 rpm

- FAG NUP2208-E-TVP2-C3 Cylindrical Roller Bearings
- 141.5 mm
- 4200 kN

- 40 mm x 80 mm x 23 mm FAG NUP2208-E-TVP2 Cylindrical Roller Bearings
- 82.55 mm
- 44.45 mm

- FAG NUP220-E-M1 Cylindrical Roller Bearings
- 218.260 kN
- 11.1 mm

- FAG NUP2211-E-M1 Cylindrical Roller Bearings
- 38.00 mm
- 2800 rpm